Shanking in Golf

Prevent Yourself From Embarrassment


shanking in golfShanking in golf must be the most disheartening and embarrassing moment in golf. You are 70 yards from the green, the pin is waiting for you to lay the ball right beside it– and you shank it right into the rough to the right of the green. For the remainder of the day you avoid pitch shots for concern this will occur once more. Its a problem even the most successful tour professionals struggle with from time to time.

That used to be me. My pitching game was normally pretty good, yet this shank to the right would appear out of nowhere and upset me for the rest of the round. It was particularly bad when this would occur on the first hole which would then affect me for the entire round.

I tried many cures which worked temporarily. My club pro assumed he had actually located the answer, yet the day after the lesson was over, out popped the shank once more. So eventually I chose to analyse the shank to discover why they take place. Perhaps then l would find a remedy.

So  here’s what I did. Set up to a golf ball with your wedge. Take your hands off the grip, just holding the club with a few fingers so it doesn’t move at all. Now rotate the shaft clockwise, so you see the clubface turn away from the body, and as you keep turning, you’ll at some point view the hosel right close to the ball.

That’s exactly what shank in golf is. It’s when you hit the ball with the hosel, which is the base of the shaft. In pitching, you’re hitting with the hosel because you opened the clubface on the backswing, and you have not closed it back down on the downswing. It’s that simple.

If you never shank complete shots, but do shank pitches, here’s the reason. When you take the club away for a pitch, you open up the clubface drastically, much more compared to you do when you start a full swing. Why you do that I would not know, yet you do open the clubface  way too much. After that when the club returns down, your wrists are still set in an open position, the clubface is rotated way open, and you introduce the hosel to the ball.

See for yourself. Swing your wedge back as if you were going to attack a pitch. Feel exactly what’s accompanying your wrists. Don’t attempt to remedy anything, simply feel exactly what’s going on with them.

Now take the wedge back completely for a few full swings. As you return, pay attention to exactly what your wrists are doing. I’ll bet it’s a great deal much less than in your pitch swing. Actually, I could practically guarantee it.

Do you see? You have an approach shanking in golf with way too much wrist action in your swing, opening up the clubface so much that you cannot shut it again just before the round is struck. Re-train yourself to hit the short pitch with the wrists cracking back as they provide for a complete shot. It might feel funny initially, however that’s since you’re really feeling of just what a short swing is needs altering. When you ultimately get it, you could begin laying those pitches dead to the hole again. I promise that, too and so your days of shanking in golf will be over.

So have you ever shanked a golf ball?
If so, you already know that this creates one of the worst golf shots imaginable.

A shanked ball is when the ball is hit with the neck of the club or with the hosel (where the club head is fitted into the shaft). It normally ends up with the ball screaming hard right, what many consider to be one of the funniest shots in golf … as long as you are not the one making it!

If you’d rather have people in awe of you than laughing at you, The Simple Golf Swing guide is an excellent way to improve your all-round golfing ability and lower your score!
Here are some tips on how to stop shanking the ball once and for all. These tips are best done under the watchful eye of your local pro or an experienced golfing buddy.
A very common reason for shanking the ball (and this one applies to everyone who is not careful) is standing too close to the ball. When a golfer stands too close to the ball, he or she has to change body posture in order to make the clubface and ball fit.
Bad mistake.
One way to check this is to simply allow both arms to hang in front of you while you grip the club as you normally do. Now, bend your upper body as if you are about to sit down, and place the clubhead where the ball would be.
Your forearms should be fairly extended, with the left arm kept straight (for right-handed golfers). If your elbows are bent, you are most likely standing too close to the ball.
If your elbows are bent, slowly move your feet back until your arms are straight. Make sure to keep the weight off of your toes.

It is important to reduce as much tension in your arms as possible. Too much tension in your arms makes it impossible for you to release the club properly on the downswing, and this leads to the hosel moving into the impact zone.
Keep in mind that cutting across the ball or performing an inside-to-outside swing can also result in a shanked ball.
If you have a tendency to cut across the ball, try this: Take your stance in front of a ball, and then raise your club two feet above the ball.
Slowly begin your backswing, and note the plane that the club takes. On the downswing, keep the plane of the club below what it was clear through to impact.
This drill also helps to eliminate the inside-outside swing that many golfers suffer.
Another cause for the notorious shank is weight distribution.
It is very important that your weight shifts from your back leg to your front leg (the one closest to the hole) before you start your downswing.
Fail to do this, and you will come over the top, which often results in the heel of the club hitting the ball.

Lastly this is one you definitely need a buddy to watch in order to know for sure if you have it or not ñ is flying elbow syndrome.
All golf swings require that you keep control of your elbows, especially that right elbow (for righties).

If you have a shanking problem, go through each of the causes above to determine which is the root of your problem. Once you know the cause, you can begin to resolve it,. And solving a shank problem is time well spent!